1. Safety First
Work in a ventilated area, away from flammable materials.
Use a double boiler to melt wax (NEVER direct heat – Junda paraffin auto-ignites at 245°C).
Wear heat-resistant gloves and goggles.
2. Wax Selection & Preparation
Choose Junda Paraffin Wax (54–60°C melt point) for optimal viscosity and adhesion.
Pre-measure wax quantities:
✓ 80–85% wax ✓ 10% fragrance (max 12% for Junda’s high-load formula) ✓ 5% dye
3. Temperature Control is Key
Melt wax SLOWLY to 52–66°C .
🔥 Pro Tip: Overheating above 85°C causes discoloration and weak scent throw.Cool wax to 55–60°C (131–140°F) before adding fragrance/dye to preserve chemicals.
4. Wick Sizing Matters
| Container Diameter | Recommended Junda Wick Size |
|---|---|
| 5–7 cm | LX-14 / CD-8 |
| 8–10 cm | LX-18 / CD-12 |
| 10+ cm | LX-22 / CD-16 |
Secure wicks with wick stickers – avoid metal tabs that snuff flames.
5. Pouring Techniques to Avoid Defects
Pre-warm glass containers to 40–45°C to prevent "wet spots."
Pour wax at 65–68°C (149–154°F) in thin streams to minimise bubbles.
For layered candles, wait until the previous layer forms a tacky film (1–2hrs).
6. Cooling & Curing
Let candles cool at 18–22°C (64–72°F) for 24–48hrs – rapid cooling causes cracks.
Trim wicks to 6mm (0.25”) after full hardening for clean burns.
7. Troubleshooting Common Issues
| Problem | Junda Solution |
|---|---|
| Frosting | Use oil-free paraffin (≤0.4%) |
| Tunneling | Increase pour temp by 3–5°C |
| Sooty Flame | Downsize wick + add 2% Vybar |
8. Store Like a Pro
Wrap cured candles in kraft paper (NOT plastic) to prevent "scent fade."
Maintain storage humidity below 60% – Junda’s desiccant packs available.
Bonus Tip: Conduct a 3-hour test burn for each new batch – the melt pool should reach the container edges within 1.5hrs.
Advantages of Junda Paraffin Wax in Candle Manufacturing:
Cost-Effectiveness: Junda paraffin wax for candle making is inexpensive and widely available, making it a cost-efficient choice for mass production.
Versatility: Junda paraffin wax for candle making can be easily blended with dyes, fragrances, and additives to create candles in various colors, scents, and textures.
High Melting Point: Junda paraffin wax for candle making has a suitable melting point (typically 46–68°C), allowing candles to burn slowly and evenly.
Smooth Finish:Junda paraffin wax for candle making hardens into a smooth, glossy surface, enhancing the aesthetic appeal of finished candles.
Malleability: Junda paraffin wax for candle making is Soft and pliable when melted, it is easy to mold into intricate shapes or standard pillars, votives, and container candles.
Consistent Burn:Junda paraffin wax for candle making Produces minimal residue and maintains a stable flame, ensuring reliable performance.
Wide Compatibility: Junda Paraffin wax for candle making Works well with most wick types and candle-making equipment.
→ Limited Offer: Order 1kg+ Junda Artisan Wax & get FREE wick sampler kit!